How to Fix Corrupted Hard Drive Using CMD in Windows 11/10/8/7?
Causes and symptoms of corrupted hard drive
Why the hard drive gets corrupted or crashed? Below are some main causes.
▸Logical damage: virus attack, bad sectors, unknown file system, disk is not formatted, raw file system, lost/corrupted partition table…
▸Physical damage: short-circuit failure, damaged chip, corrupted header, dropped from high places, degradation of moving parts in the hard disk over time…
▸Improper human operations: sudden power failure, removed without safe removal, shut down system improperly…
When the hard drive gets corrupted, you will notice the following symptoms or error messages.
▶Black screen appears after the system booting screen.
▶No bootable device found, computer cannot boot successfully.
▶Clicking or grinding sound from hard drive - it is going to die soon, or won't boot already
▶It takes a much longer time for accessing files and folders. Or the files and folders become invisible and corrupt.
▶The type of file system is raw, CHKDSK is not available for RAW drives.
▶"X:\ is not accessible. The file or directory is corrupted and unreadable".
How to fix corrupted hard drive using CMD?
When your hard drive is corrupted, you can refer to the following content to fix corrupted hard disk using Command Prompt. Before proceeding, you had better recover data from the damaged hard drive, and move them to another safe location.
To start the corrupted hard disk repair process, first of all, you should open Command Prompt as administrator (Click Search box, input Command Prompt, right-click the icon and choose Run as administrator. Or press Win+R, input "cmd" in the elevated Run dialogue and press on Enter).
Then, type the command ("chkdsk g: /f") and press Enter to start the error checking and fixing process for your corrupted drive:
Note: the g: is the drive letter of the damaged hard drive, the f means fixing errors on the disk.
You can add more parameters to the command to make the scan process more rigorous.
"chkdsk g: /f /r /x": /x locates bad sectors and recovers readable information. /r forces the volume to dismount before the scan if required.
Free alternative to CMD: fix damaged hard drive more easily
If you think the process of how to fix corrupted hard drive using CMD (running CHKDSK.exe) is a little complicated, or you encounter "CHKDSK is not available for RAW drives" error message during the repairing process, you can turn to Qiling Disk Master Standard, which can support Windows 11/10/8.1/8/7, XP and Vista. It provides you with three different ways to repair damaged hard drive. Free download it and have a try now.
- 1. Check Partition for errors
- 2. Rebuild MBR of corrupted hard drive
- 3. Reformat the corrupted hard drive
1. Check Partition for errors
Step1. Install and run Qiling Disk Master. Right-click the partition you want to check and select "Advanced"> "Check Partition".
Step 2. In the pop-out window, you have a options available, check and fix error by using chkdsk.exe, check error only using chkdsk.exe, and find bad sectors. Choose one according to your needs and click "Proceed". Then wait for the process to complete.
Besides, you can also right-click the disk you want to scan and select the "Surface Test" to check disk error.
If checking and repairing disk/partition by chkdsk.exe fails, then you can consider the option of rebuilding the MBR of the damaged hard drive. Luckily, Qiling Disk Master could also perform this task.
2. Rebuild MBR of corrupted hard drive
Step 1. Open Qiling Disk Master, right-click the corrupted disk and select "Rebuild MBR".
Step 2. Select a proper MBR type for your current operating system.
Step 3. Click "Proceed" butto to commit the pending operation.
Then, you can check whether the corrupted hard drive can be used normally again. If not, you can try to reformat it via this software.
3. Reformat the corrupted hard drive
Step 1. In the main interface of Qiling Disk Master, right-click any partition of the corrupted disk and select "Format Partition".
Step 2. Select a file system (ex: FAT32).
Step 3. Click "Apply" to start formatting the partition.
Conclusion
Now, you know how to fix corrupted hard drive using CMD step by step. If you want to repair the damaged hard drive in an easier way, Qiling Disk Master is a great choice. Moreover, its Professional Edition comes with more advanced functions like securely erasing SSD, clone MBR hard drive to GPT, convert hard drive between MBR and GPT without deleting partitions, optimizing SSD performance by 4K alignment and more.
Related Articles
- Free SanDisk USB Repair Tool: Repair Corrupted USB Drive in Windows 10/8/7
Looking around for a SanDisk USB repair tool? Here we share a free SanDisk USB flash drive repair program, which can help repair corrupted (SanDisk) USB drives effectively. - Solved| The Type Of The File System Is RAW on SD Card
Sometimes, you may encounter the error "The type of the file system is RAW" while running CHKDSK on the storage device. So here we will explain it occurs and how to fix the RAW file system effectively. - SD Card I/O Error Occurs – How to Fix it? ( 4 Fixes Included)
SD card I/O error occurs when you try to open it or copy files to it? This paper will illustrate why it happens and how to repair SD card I/O error effectively and simply.