Best Seagate Disk Cloning Software in Windows 11/10/8/7
Why need Seagate disk cloning software
If you are planning to clone Seagate HDD to SSD for hard drive replacement or data protection, an effective Seagate disk cloning software is necessary. It could greatly help you in following situations:
- Upgrade HDD to SDD for better computer performance.
- Replace the old hard drive with a new hard drive for larger capacity.
- Duplicate the data in Seagate hard drive as a backup.
Whichever your case is, the process of disk cloning will ensure your data security. But here comes the question: What software can you use to clone Seagate HDD/SSD?
Best software to clone Seagate HDD or SSD (review & download)
Seagate DiscWizard is an integrated Seagate disk cloning software. It's designed for Seagate and Maxtor hard drives, allowing you to backup or clone the disk, so as to perform disk migration, disaster recovery, etc. However, as a disk clone software, Seagate DiscWizard has some limitations:
⛔ It cannot clone a single partition. The only option is to clone the entire disk with all the data on it. It doesn't support cloning dynamic disk, either.
⛔ As for backup, it only backs up partitions and disks, files and folders are not available. Meanwhile, the back image can only be restored to the exact same computer.
⛔ Seagate DiscWizard only applies to Seagate and Maxtor hard drives, and the disk cloning might fail sometimes. If you have this problem, please refer to Seagate DiscWizard not cloning.
Therefore, you could consider using another disk clone software with higher compatibility and richer functionality, Qiling Disk Master Professional, for example. It's an easy-to-use software works in Windows 11/10/8.1/8/7/XP/Vista with some significant advantages:
🔹 It enables you to clone the disk or individual parititons, and has no restriction on hardware brands.
🔹 It contains backup features for files & folders, partitions, operating system and disk.
🔹 It supports clonining between disks of different sizes. With the intelligent cloning technology, you can even clone larger drive to smaller drive; If the target disk is larger, you can also choose sector-by-sector clone to every sectors no matter used or not.
🔹 In case the computer fail to boot, you can also create a bootable media that can start a crashed computer allowing you to perform backup, restore and clone in WinPE.
You could simply download the free demo, and follow the tutorial to give it a try:
How to perform Seagate disk cloning with best software
Using Seagate disk cloning software is the easiest and safest way to clone a hard disk - you don't need to copy & paste manually, or go through the process of backup and then restore.
But still, there are some preparations to be done at first:
- Delete unwanted files and uninstall unnecessary apps on the source disk.
- Install the target HDD/SSD properly. If there's only one slot, use SATA-to-USB adapter to connect it.
- Choose a Seagate cloning software to download and install.
- The destination disk will be overwritten after cloning. Remember to backup any important data stored on it.
- Way 1. Clone Seagate disk with specialized clone software DiscWizard
- Way 2. Clone Seagate or other hard drive with powerful software Qiling Disk Master
Way 1. Clone Seagate disk with specialized software DiscWizard
For a basic Seagate disk, you can use DiscWizard to clone disk with following steps:
1. Launch Seagate DiscWizard, choose Clone Disc in the Home page.
2. Choose Clone Mode as Automatic (recommended) and click Next.
3. Then select the source disk and hit Next.
4. Select the destination disk from the list, then click Next to continue.
If the destination disk has been partitioned, you'll be required to confirm the deletion of all the partitions on it.
5. Check the Summary page and click Proceed to start the Seagate disk cloning.
Tips:
- Only basic disks can be cloned with Seagate DiscWizard. Dynamic disks are not supported.
- Using Seagate DiscWizard to clone disk with active operating system requires a reboot to continue the operation.
- It's better not to format the source disk until you are sure that the cloned disk can boot properly.
Way 2. Clone Seagate or other hard drive with powerful software
As mentioned above, DiscWizard has a few drawbacks as a Seagate hard drive cloning software. If you are finding a more powerful disk cloning solution, Qiling Disk Master Professional may be the answer.
How to clone Seagate disk with Qiling Disk Master:
1. Connect the second disk (use a USB-to-SATA adapter if necessary). Install and launch the software, go to Clone tab and select Disk Clone to copy all the partitions including system partition.
2. Select the Seagate disk as the source disk and click Next.
3. Choose the destination disk which you just connected, click Next.
4. Confirm the operation and click Proceed to begin disk cloning. Optionally, you can click Edit Partition, SSD Alignment or Sector By Sector Clone as you like.
SSD Alignment: Accelerate the reading and writing speed of the target SSD.
Sector By Sector Clone: If you want to create an intact copy of all the sectors, you can tick this option. Note the target disk need to be equal to or larger than the source disk.
Edit Partition: adjust the partition size and drive letter on the destination disk.
Tips:
- The Professional edition supports data disks and system disks of all brands and partition styles. You can clone MBR to MBR/MBR to GPT or GPT to GPT/GPT to MBR directly. But you still need to make sure the partition style of the target disk is compatible with the boot mode.
- If you want to clone only operating system, you can also use the System Clone feature to clone only OS to SSD or HDD.
Verdict
In addition to the Seagate disk cloning software DiscWizard, you can use Qiling Disk Master as an adequate alternative to clone Seagate and other disk. With its complete features, it becomes much easier to perform data or OS migration.
Qiling Disk Master is also a powerful backup & restore tool that can be used in daily data protection. The Schedule feature enables you to schedule automatic backup for files, system or the disk. And if you are a Windows Server user, you can also use choose the specially designed Server edition.
Related Articles
- Seagate Disk Clone Software: Free Clone Seagate HDD to SSD
You will get two Seagate disk clone software and how to clone HDD to Seagate SSD step by step. Learn more details below. - Solved: Seagate Discwizard Does Not Detect Drive
Are you troubled with the issue that Seagate DiscWizard does not detect drive? This article will help you look into the problem and get it fixed. - Quickly Create Seagate DiscWizard Image Backup with Simple Steps
This article introduces you to Seagate DiscWizard and how to create Seagate DiscWizard image backup and recovery in detail. Scroll down below to learn everything you want to know. - Download Powerful Seagate Hard Drive Backup Software
Find the best Seagate hard drive backup software to backup data to Seagate external hard drive safely and easily according to the following text.