Easiest Way to Recover Data after Initializing Disk


Table of Contents
  1. What does initialize disk mean?
  2. Does initialize disk erase data?
  3. How to recover data after initialize disk effectively
    1. Easy steps to recover data from initialized disk via Deep Data Recovery
  4. How to initialize disk without losing data
    1. Part 1: Backup not initialized disk
    2. Part 2: Initialize disk in Disk Management
    3. Part 3: Recover data after initialize disk via Deep Data Recoveryy
    4. Part 4: Create a new partition with Disk Management
  5. Conclusion

What does initialize disk mean?

Initializing disk is a process of building or rebuilding MBR (Master Boot Record), the first sector of a hard drive, which stores information to load logical partitions, even system files on it if there are.

During the disk initialization process, the Disk Management or third-party tool will write or rewrite the 0 sectors in the MBR partition table. However, only initializing the disk won't make it usable again. You need to further partition and format the drive.

Does initialize disk erase data?

Typically, Windows will ask you to initialize the disk in the following two situations. And there is no data loss if you initialize a new disk. But if the disk becomes not initialized suddenly, you will lose your data, as you need to partition and format the disk after initializing. If you don't partition the disk after initializing, you cannot use it for storage.

#1: You install a brand new disk on the current computer and doesn't show up in File Explorer.

#2: Your old disk shows "Unknown, Not Initialized" suddenly.

So it is necessary to recover data after initializing the disk and save it to a new location.

How to recover data after initialize disk effectively

If the disk you initialized is an old disk that suddenly became uninitialized, you need to recover data as soon as possible. The easiest way is to use a data recovery software like Deep Data Recovery, which enables you to retrieve data from all data loss scenarios in Windows 11/10/8/7/Vista.

Easy steps to recover data from initialized disk via Deep Data Recovery

Deep Data Recovery is a professional data recovery software that supports recovering all file types like photos, videos, and other files. And thanks to its intuitive interface, you can restore your data effortlessly in simple steps.

Now, you can download this software and follow the instructions below to recover data after formatting the hard disk.

Tip: Connect the initialized disk to your computer and make sure it can be detected by your Windows computer.

Step 1. Install and launch this software. Select the partitions or the disk you want to scan.

select-the-formatted-partition-to-scan

Step 2. Deep Data Recovery will scan it at a fast speed. If you find the data you want, you can recover it directly during scanning.

scanning-formatted-partition

Step 3. Search your file names or find the lost files by types, size and date modified. Select the file and click "Recover" to save it.

select-files-to-recover-from-formatted-partition

How to initialize disk without losing data

Sometimes, if you are asked to initialize a disk, which is unavoidable, usually, at this point in time, the disk has become uninitialized. So how to initialize disk without losing data?

In fact, the disk initialization process only affects the 0 sectors in MBR, which will not erase your data. However, further partitioning and formatting will. To be sure your data is safe, you can choose to backup the entire disk just in case of secondary damage and then initialize the disk, recover data, as well as partition the disk for data storage.

Part 1: Backup not initialized disk

To backup the not initialized disk, you need a reliable backup utility, which supports backing up disk sector by sector. Qiling Disk Master Standard is such software you can use and it will keep the disk as it was. If you fail to recover data, you still can restore disk image and try again. It applies to Windows 11/10/8.1/8/7/XP/Vista.

Please download it and backup the not initialized disk:

Open Qiling Disk Master Standard after installing and select Disk Backup under the Backup tab. Select the not initialized disk and a new one as source and destination disk.

Disk Backup

Before clicking Proceed, select Options > Backup Mode > Intelligent Sector > Make an exact backup and click OK to confirm you want to backup disk sector by sector.

Intelligent Sector

For detailed steps, you can refer to performing disk backup in Windows 10.

Part 2: Initialize disk in Disk Management

Press Windows + R to open the Run window, type diskmgmt.msc and click OK to open it. Right-click the not initialized disk and select Initialize Disk, then partition style (GPT or MBR), click OK to initialize disk.

Initialize Disk

Part 3: Recover data after initialize disk via Deep Data Recoveryy

For this part, you need to use professional data recovery software - Deep Data Recoveryy, and you can follow the steps in the previous section. In most cases, you can recover your data from initialized disk.

Note that you need to restore data to a new location, otherwise, you will lose data after partitioning the disk. If fail to recover data, you still can restore disk backup created previously and try again.

Part 4: Create a new partition with Disk Management

Open Disk Management, right-click the unallocated space on the disk, and select New Simple Volume... to access the New Simple Volume Wizard. Click Next and then select disk size, drive letter and file system (NTFS or FAT32), click Next and Finish.

create-new-simple-volume

Conclusion

No matter what reason you initialize the disk, you may want to learn an easy way to recover data after initializing disk. Right here, the easiest way! Also, this article still offers you the way to initialize disk without losing data step by step. So you don't need to worry about data loss whether you initialize the disk or not.

To prevent disk become not initialized again, it's suggested to create a disk backup regularly, such as, daily, weekly, monthly. If you are worried backup disk full issue, you can use its backup scheme feature in the advanced edition, such as Qiling Disk Master Professional, which has the ability to backup only changed files or delete old backup automatically. For server users, please turn to Qiling Disk Master Server.

Related Articles


Is this information helpful?     

What can we do to improve this information? (Optional)
Refresh Please enter the verification code!